Truss rod 14 1/8" for guitar necks

Two way adjustable Rod is for inserting in neck while building. Similar to many OEM style rods.

14 1/8" Long

Specifications:

14 1/8" Length (varies slightly due to construction 14 1/8" - 14 1/4") Rod length is tip to end of nut Two Way Adjustment 4mm Allen key head body is wrapped in blue shrink wrap to allow for gluing.

Works very well for heel mounted nut, also can be used for headstock setup or tilt back headstock  

Requires: 1/4" wide slot 3/8" depth (approximate, actual is .369" allow for adjusting) Cut for nut area is 1.75" long by .425" (about 7/16" total top to bottom) Wrapped two way adjustable rod

14 1/8" overall length We have drawings available for this application, please contact us for additional information. PLEASE NOTE: We recommend you bench test the rod prior to installation in your neck. While we do not have many issues with the performance of this rod, but it is a good idea to check the rod prior to installation. Bench testing can be down by placing each end of the rod in a vise and moving the rod in a normal range of motion and beyond to check the rod. After installation the rod can be very difficult to remove or repair. We test all rods here in the US, but we do suggest this additional step to insure the rod is working correctly prior to placement in the neck.